Becker MEXICO - Digital Level; Displaying the Volume; Volume for Acoustic Signals

181
Settings
Volume for acoustic signals
You can change the volume for acoustic
signals.
X Select $XGLR in the system settings.
X Select 9ROXPHRIZDUQLQJWRQHV.
X Turn the rotary control/push button
to select the required value.
Displaying the volume
You can activate/deactivate the display of
a change in volume in graphics format.
X Select $XGLR in the system settings.
X Select 'LVSOD\YROXPH.
X Turn the rotary control/push button
to switch the function on ( ) or off
().
Digital level
You can adapt the volume level of digital
audio sources (CD and all MP3 sources)
to analogue audio sources (radio).
X Select $XGLR in the system settings.
X Select 'LJLWDOOHYHO.
X Turn the rotary control/push button
to select the required value.
Note:
Only one of the two settings can be
active ( ) at one time.
Note:
A low value indicates a low volume for
acoustic signals.
7017
7018
Note:
A setting of “0” indicates no decrease in
volume.
A setting of “10” indicates a significant
decrease in the volume of the digital
audio source.
7019