170
Settings
The external device has previously
been connected to the Mexico
When the external device attempts to
establish a connection, a signal tone can
be heard and the following message
appears.
X Select between <HV, 1R and $OZD\V.
•
<HV
Connection to the external device is
allowed.
• 1R
Connection to the external device is
rejected.
•
$OZD\V
Connection to the external device is
allowed. The function described in
“Always allow connection” auf
Seite 166 will also be activated.
Further connection requests will be
accepted without a query.
If the connection to the external device
is established successfully, another
signal tone can be heard and the
following message appears.
X Press the rotary control/push button
.
A connection has now been established
to the external device.
The external device has not been
connected to the Mexicobefore
When the external device attempts to
establish a connection, a signal tone can
be heard and the following message
appears.
X Select between<HV and 1R.
If you select
<HV, you will be requested
to enter a password.
X Enter password by rotating/ pressing
the rotary control/push button .
X Select the symbol from the
input menu.
or
X press the rotary control/push button
and hold for at least 2 seconds.
Note:
If the function described in “Always
allow connection” auf Seite 166 is
activated, a short signal tone can be
heard and a message appears which
confirms that the external device has
been connected.
To Next Page
Loading...
