1 Preparing the Installation
This chapter provides details on product identification, part names, installation and cable
specifications. To install the inverter correctly and safely, carefully read and follow the instructions.
1.1 Product Identification
The H2 Series Inverter is manufactured within a range based on inverter capacity (HP/kW) and power
source specifications (240V/480V/575V). Product name and specifications are detailed on the name
plate. Check the name plate before installing the product and make sure that the product meets your
requirements. For more detailed product specifications, refer to 13.1, Input and Output Specifications on
page 357.
Note
Check the product name, open the packaging, and then confirm that the product is free from
defects. Contact your supplier if you have any issues or questions about your product.
To Next Page
Loading...
