BENSHAW RSi H2 Series - Monitor Mode (MON); Parameter Initialization

LCD Display Modes
293
890053-00-02
9.6.2 CNF-20 Monitor Mode (MON)
On the LCD keypad, the inverter’s operating conditions can be monitored at the Monitor Mode
display. A maximum of four items can be selected and monitored simultaneously. The items are
selected in the Configure (CNF) Group. Monitoring mode displays three different items (CNF-21,
22 and 23) and one additional item (CNF-20) in the status bar at the top of the screen. Refer to
section 9.2 Monitor Mode (MON) on page 280 for details on configuring Monitor Mode items.
Group
Code
Name
LCD Display
Parameter Setting
Setting
Range
Uni
t
CNF
20
Display item condition
display window
Anytime Para
0
Frequency
-
-
21
Monitor mode display 1
Monitor Line-1
0
Frequency
-
Hz
22
Monitor mode display 2
Monitor Line-2
2
Output Current
-
A
23
Monitor mode display 3
Monitor Line-3
3
Output Voltage
-
V
24
Monitor mode initialize
Mon Mode Init
0
No
-
-
9.6.3 CNF-40 Parameter Initialization
The parameters changed by the user can be initialized to the factory default settings. Initialize
parameters in all groups by selecting 1 (All Grp) or select specific groups . The parameters cannot
be initialized if the inverter is operating or during a fault condition.
Group
Code
Name
LCD Display
Parameter
Setting
Setting
Range
Unit
CNF
40
Parameter
initialization
Parameter Init
0
No
0–14
Parameter Initialization Setting Details
Code
Description
CNF-40
Parameter Init
Setting
LCD
Display
Function
0
No
No
-
1
Initialize all groups
All Grp
Initialize all data. Select 1(All
Grp) and press [PROG/ENT]
button to start initialization. On
completion, 0 (No) will be
displayed.
2
Initialize DRV group
DRV Grp
Initialize data by groups.
Select initialize group and
press [PROG/ENT] button to
start initialization. On
completion, 0 (No) will be
displayed.
3
Initialize BAS group
BAS Grp
4
Initialize ADV group
ADV Grp
5
Initialize CON group
CON Grp
6
Initialize IN group
IN Grp
7
Initialize OUT group
OUT Grp
8
Initialize COM group
COM Grp
9
Initialize PID group
PID Grp
10
Initialize AP1 group
AP1 Grp
11
Initialize AP2 group
AP2 Grp
12
Initialize AP3 group
AP3 Grp
13
Initialize PRT group
PRT Grp
14
Initialize APO group
APO Grp