BENSHAW RSi H2 Series - About the Display

Performing Basic Operations
55
890053-00-02
3.1.2 About the Display
3.1.2.1 Monitor Mode
The following table lists display icons and their names/functions.
No.
Name
Description
1
Operation mode
Displays one of the following inverter modes: Use MODE
button to move through modes.
MON: Monitor mode
PAR: Parameter mode
U&M: User Group and Macro mode
TRP: Trip mode
CNF: Configure mode
2
Rotational direction
Displays the motor’s rotational direction:
3
Command Source /
Frequency reference
(EX: T / K)
Displays a combination of a command source and a
frequency reference source.
Command source
K: Keypad
T: Terminal block (digital input)
O: Optional Fieldbus module
A: Application option
E: Time event
R: Built-in RS-485 communication
Frequency reference source
K: Keypad
V: V1 terminal
X: I2 terminal
P: Pulse terminal
U: Up operation frequency (Up-down operation)
D: Down operation frequency (Up-down operation)
S: Stop operation frequency (Up-down operation)
O: Optional Fieldbus module
J: Jog frequency
R: Built-in RS-485 communication
1~7: Multi-step frequency (Fixed Speeds)
Status Bar