BENSHAW RSi H2 Series - Changed Parameter Display; User & Macro Mode (U&M); Macro Selection

LCD Display Modes
294
890053-00-02
9.6.4 CNF-41 Changed Parameter Display
This feature displays all the parameters that are different from the factory defaults. Use this feature
to track changed parameters.
Group
Code
Name
LCD Display
Parameter
Setting
Setting
Range
Unit
CNF
41
Changed parameter
display
Changed
Para
0
View All
-
-
Changed Parameter Display Setting Details
Code
Description
CNF-41
Changed Para
Setting
Function
0
View All
Display all parameters
1
View Changed
Display changed parameters only
9.6.5 CNF-42 User & Macro Mode (U&M)
Create a unique list of most often used parameters (USR Group). Register user-selected
parameters from the existing parameter groups. The user group can carry up to a maximum of 64
parameter registrations. Refer to section 9.4 User & Macro Mode (U&M) on page 281 for User
Group setting details.
Group
Code
Name
LCD Display
Parameter
Setting
Setting
Range
Unit
CNF
42
Multi-function button
settings
Multi Key Sel
1
UserGrp
SelKey
-
-
45
Delete all user registered
parameters
UserGrp
AllDel
0
No
-
-
9.6.6 CNF-43 Macro Selection
The H2 Series inverter includes 3 macro groups of parameters (Pump, Fan and Constant Torque). A
Macro group contains various parameters in one group that are common to specific applications.
Refer to 9.4.2 Macro Groups (MC1, MC2, MC3) on page 283 for more details.
Group
Code
Name
LCD Display
Parameter Setting
Setting Range
Unit
CNF
43
Macro selection
Macro Select
0
Basic
0-3
-
1
Pump
2
Fan
3
Constant Torque