BENSHAW RSi H2 Series - Fault Monitoring

Performing Basic Operations
77
890053-00-02
3.3 Fault Monitoring
3.3.1 Monitoring Faults during Inverter Operation
The following example shows how to view fault information that occurred during inverter operation.
TRP Current
Over Voltage (01)
01 Output Frequency
36.00 Hz
02 Output Current
77.3 A
TRP Current
03 Inverter State
Steady
04 DCLink Voltage
820 V
05 Temperature
22 °C
MON T/K STP 0.0A
Frequency
0.00 Hz
0.0 A
0 kW
•When the fault is cleared and the inverter is
reset, the display returns to the previous screen,
prior to the fault.
When a fault occurs, the inverter enters the trip
(TRP) mode and displays the active fault
(flashing).
Press the down arrow button to view additional
information at the time of the fault.
N