BENSHAW RSi H2 Series - Setting the Monitor Mode Display Line Items

Performing Basic Operations
75
890053-00-02
3.2.7 Setting the Monitor Mode Display Line Items
In Monitor (MON) mode, 3 different line items are displayed. The items displayed on the LCD can be
changed by the user. In HAND mode and in OFF mode, the first line item is permanently fixed as the
frequency reference.
The following example shows how to configure the Line-3 to display Output Power (kW).
MON K/K STP 0.0Hz
Frequency
0.00 Hz
0.0 A
0 V
CNF STP 0.0Hz
00 Jump Code
42 CODE
01 Language Sel
English
02 LCD Contrast
CNF STP 0.0Hz
21 Monitor Line-1
Frequency
22 Monitor Line-2
Output Current
23 Monitor Line-3
Output Voltage
CNF STP 0.0Hz
23 Monitor Line-3
0 Speed
1 Output Current
2 Output Voltage
CNF STP 0.0Hz
23 Monitor Line-3
2 Output Current
3 Output Voltage
4 Output Power
CNF STP 0.0Hz
21 Monitor Line-1
Frequency
22 Monitor Line-2
Output Current
23 Monitor Line-3
Output Power
MON K/K STP 0.0Hz
Frequency
0.00 Hz
0.0 A
0 kW
Press the MODE button to return to the monitor
(MON) mode.
At "4 Output Power", press the PROG/ENT
button to select Output Power as Line-3.
•Highlights the present setting of CNF-23.
To see the available display items for Line-3,
use the up/down arrow buttons.
On power up, the LCD boots up in the monitor
(MON) mode.
•The default settings of the monitored items are
Line-1: Output Frequency, Line-2: Output Amps
and Linie-3: Output Voltage.
Press the MODE button to move to the
Configure (CNF) mode.
•Press the down arrow button to get to
parammeters CNF-21, CNF-22 and CNF-23.
Press the PROG/ENT button on CNF-23
Display returns to the CNF parameter list.
N
N
N
N
N
N
N