BENSHAW RSi H2 Series - Parameter View Lock; Parameter Lock

LCD Display Modes
296
890053-00-02
9.6.9 CNF-50 Parameter View Lock
Use parameter view lock to hide parameters after registering and entering a user password.
Group
Code
Name
LCD Display
Parameter Setting
Setting Range
Unit
CNF
50
Parameter view
lock
View Lock Set
Unlocked
0–9999
51
Parameter view
lock password
View Lock Pw
Password
0–9999
Parameter View Lock Setting Details
Code
Description
CNF-51
View Lock Pw
Register a password to be used with CNF-50. Follow the steps below
to register a password.
No
Procedure
1
Pressing [PROG/ENT] button on CNF-51 will show the
previous password input window. If registration is made for the
first time, enter 0. It is the factory default.
2
If a password had been set, enter the saved password.
3
If the entered password matches the saved password, a new
window prompting the user to enter a new password will be
displayed (the process will not progress to the next stage until
the user enters a valid password).
4
Register a new password.
5
After registration, parameter CNF-51 will be displayed.
CNF-50
View Lock Set
To enable parameter view lock, enter a registered password. [Locked]
sign will be displayed on the screen to indicate that parameter view
lock is enabled. To disable parameter view lock, re-enter the password.
The [locked] sign will disappear.
9.6.10 CNF-52 Parameter Lock
Use parameter lock to prevent unauthorized changes to parameter settings. To enable parameter
lock, register a user password first in CNF-53. To lock and unlock parameter changes, enter the
password in CNF-52.
Group
Code
Name
LCD Display
Parameter
Setting
Setting
Range
Unit
CNF
52
Parameter lock
Key Lock Set
Unlocked
0–9999
-
53
Parameter lock
password
Key Lock PW
Password
0–9999
-