BENSHAW RSi H2 Series - Page 68

Performing Basic Operations
56
890053-00-02
No.
Name
Description
4
Multi-function button
configuration
The function of the “MULTI” button is selected with
parameter CNF-42. It can be used to register or delete
parameters in the User group or can also be used for
Time/Date display.
5
Operating status
Displays one of the following operating states:
STP: Stop
FWD: Forward operation
REV: Reverse operation
DC: DC output
WAN: Warning
STL: Stall
SPS: Speed search
OSS: S/W over current protection is on
OSH: H/W overcurrent protection
TUN: Auto tuning
PHT: Pre-heat
FIR: Fire mode operation
SLP: Sleep mode operation
LTS: Load tuning
PCL: Pump clean
6
Status Bar Display item
Displays data selected with parameter CNF-20 (Anytime
Para). Default: Frequency
7
Monitor mode item 1
Displays data selected with parameter CNF-21 (Monitor
Line-1). Default: Frequency
8
Monitor mode item 2
Displays data selected with parameter CNF-22 (Monitor
Line-2). Default: Output Current
9
Monitor mode item 3
Displays data selected with parameter CNF-23 (Monitor
Line-3). Default: Output Voltage
10
Monitor mode cursor
Used to highlight currently selected items.