BENSHAW RSi H2 Series - Page 69

Performing Basic Operations
57
890053-00-02
3.1.2.2 Parameter Program Mode
The following table lists display icons and their names/functions.
No.
Name
Description
1
Operation mode
Displays one of the following inverter modes: Use MODE
button to move through modes.
MON: Monitor mode
PAR: Parameter mode
U&M: User defined and Macro mode
TRP: Trip mode
CNF: Config mode
2
Rotational direction
Displays the motor’s rotational direction:
3
Parameter group
Displays one of the following parameter group names:
DRV: Drive group
MOT: Motor group
BAS: Basic group
ADV: Advanced group
CON: Control group
IN: Input group
OUT: Output group
COM: Communication group
PID: PID group
AP1, AP2, AP3: Application groups
PRT: Protection function group