BENSHAW RSi H2 Series - Page 70

Performing Basic Operations
58
890053-00-02
No.
Name
Description
4
Multi-function button
configuration
The function of the “MULTI” button is selected with parameter
CNF-42. It can be used to register or delete parameters in
the User group or can also be used for Time/Date display.
5
Operating status
Displays one of the following operation states:
STP: Stop
FWD: Forward operation
REV: Reverse operation
DC: DC output
WAN: Warning
STL: Stall
SPS: Speed search
OSS: S/W over current protection is on
OSH: H/W overcurrent protection
TUN: Auto tuning
PHT: Pre-heat
FIR: Fire mode operation
SLP: Sleep mode operation
LTS: Load tuning
PCL: Pump clean
6
Status Bar Display item
Displays data selected with parameter CNF-20 (Anytime
Para). Default: Frequency
7
Parameter value
Displays the value of currently selected parameter. Can be
changed at this screen (Arrow buttons).
8
Setting range
Displays the range of values for the selected parameter.
9
Set value
Displays the currently set value for the parameter.
10
Default
Displays the factory default value for the parameter.
11
Parameter # and name
Displays the number and name of the currently selected
code/number.