BENSHAW RSi H2 Series - Page 310

LCD Display Modes
298
890053-00-02
Group
Code
Name
LCD Display
Parameter
Setting
Setting Range
Unit
74
Cooling fan operation
accumulated time
Fan time
0/00/00 00:00
-
min
75
Initialize Cooling fan
operation time
Fan Time
Reset
0
No
0–1
-
Operation Time Monitor Setting Details
Code
Description
CNF-70
On-time
Displays accumulated power supply time (On-time). Information is displayed in
[YY/MM/DD Hr: Min (0/00/00 00: 00)] format.
CNF-71
Run-time
Displays accumulated time (Run-time) of voltage output by run command input.
Information is displayed in [YY/MM/DD Hr: Min (0/00/00 00: 00)] format.
CNF-72
Time Reset
Setting 1(Yes) will delete power supply accumulated time (On-time) and
operation accumulated time (Run-time) and is displayed as 0/00/00 00:00
format.
CNF-74
Fan time
Displays accumulated time of inverter cooling fan operation. Information will be
displayed in [YY/MM/DD Hr: Min (0/00/00 00: 00)] format.
CNF-75
Fan Time Reset
Setting 1(Yes) will delete cooling fan operation accumulated time (Fan-time)
and will display it in 0/00/00 00:00 format.