10.3.6.1.3 Error Response
* Func. Code of the error response is [Request Func. Code] + 0x80.
10.3.6.1.4 Writing One Inverter Parameter Value (Func. Code: 0x06)
Address 1 of the inverter parameter (common area or keypad) to be written to.
The inverter parameter (common area or keypad) value to write with.
10.3.6.1.6 Normal Response
10.3.6.1.7 Error Response
* Func. Code of the error response is [Request Func. Code] + 0x80.
10.3.6.1.8 Writing Multiple Registers (Func. Code: 0x10)
Starting address 1 of the inverter parameters (common area or keypad) to
be written to.
Number of the inverter parameters (common area or keypad) to be written.
The inverter parameter (common area or keypad) values to write with.
To Next Page
Loading...
