Brother LX27NT User Manual

3 - 44
Upper shaft, Needle bar and Presser foot unit Application of Assembly
Application Application
1-6 Attachment of Needle bar supporter assy
 Type A
1. Insert the needle bar supporter shaft 1 into the upper side hole of the
needle bar supporter assy 2, and then align the screw hole of the needle
bar supporter assy 2 with the hole of the needle bar supporter shaft 1,
and then tighten the screw 1 until the position of the right figure.
2. Attach the screw 2 to the needle bar supporter shaft 1.
3. Insert the needle bar supporter shaft 1 to the shaft bushing 3.
4. Attach the spring to the screw 1 and the base holder assy.
<In case of Type B, refer to next page.>
1
2
S09
1
1
2
2
2
3
S09
1
S09
Taptite, Bind S
M3X20
Set Screw, Socket (CP)
M3X5
25
SPRING
XE9140***

Brother LX27NT Specifications

General

Type	Manual sewing machine
Sewing speed	800
Stitch width	5 mm
Feed dog type	5 point
Product color	White
Buttonhole type	1 Step
Number of programs	-
Number of button holes	1
Sewing machine functions	Sewing
Automatic needle threader	Yes
Number of stitch patterns	27
Power supply type	Electric