COPYRIGHT
©
2001 CANON INC.
2000 2000 2000 2000
CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-52
P-TBL-C/M/Y/K
Use it to make fine adjustments so that the hues will be closer to the hues of
offset printing.
After comparing M/C/Y/K outputs against professionally (offset) printed
material, if the print-out is lighter, increase the setting of ‘P-TBL-M/C/Y/K’.
If the print-out is darker, decrease the setting of ‘P-TBL-M/C/Y/K’.
Settings range
–3 ~ + 3 (Standard: 0)
See the descriptions under ‘OPTION > R-OPT > MANAGE’.
P-TBL-C
Settings range
–3 ~ + 3 (Standard: 0)
See the descriptions under ‘OPTION > R-OPT > MANAGE’.
P-TBL-Y
Settings range
–3 ~ + 3 (Standard: 0)
See the descriptions under ‘OPTION > R-OPT > MANAGE’.
P-TBL-K
Settings range
–3 ~ + 3 (Standard: 0)
See the descriptions under ‘OPTION > R-OPT > MANAGE’.
Note 1: You must enter the appropriate value whenever you have replaced a PCB or
initialized a RAM; record any new values on the service label for this pur-
pose.
To Next Page