COPYRIGHT
©
2001 CANON INC.
2000 2000 2000 2000
CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-121
<R-OPT (reader-related machine settings)>
F00-500-02
DISP
ADJUST
FUNC
P-SIZE
METAL
CONTROL
THIN-APS
COUNTER
OPTION
TEST
R-OPT
READY READY
0
0
0
0
MANAGE
0
OHP-MODE
0
SMP-NUM
0
P-SIZE
*1
Identifies the size of paper and transparency film of the copier.
Settings 0: AB-configuration
1: Inch-configuration
2: A-configuration
3: All
METAL
*1
Determines whether to use or not metal mode in user mode.
Settings 0: Not available
1: Available (Standard: 0)
CONTROL
*1
Use it to enable copying, printing, and scanning in the absence of the fol-
lowing input:
• control key inserted
• card inserted (with Control Card-IV/Card Reader-B1 connected)
• ID number entered (when pre-set)
Settings 0 to 44 (default: 0)
(Each digit may be between 0 and 4; if set to ‘0’, conditional operation
is not enabled.)
Remarks Value of Each Digit and Enabled Operations
1st digit: operation settings when control key is turned off
2nd digit: operation setting when card is not inserted
3rd digit: operation setting when ID No. is not entered
Value of digit
0
1
2
3
4
BW copy
×
×
×
°
°
Color copy
×
×
×
×
×
BW print
×
×
°
×
°
Color print
×
×
°
×
°
Scan
×
×
×
×
×
°
: enabled ×: disabled
To Next Page