Canon CLC5000 - Page 711

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON CLC5000 REV.0 JAN. 2001
SERVICE MODE
S-122
EX 1 If the setting is ‘2’,
When the control key is turned off, black-and-white printing/color
printing is enabled.
When the control card is not inserted, none is enabled.
When the ID No. is not entered, none is enabled.
EX 2 If the setting is ‘431’,
When the control key is turned off, none is enabled.
When the card is not inserted, black-and-white copying is enabled.
When the ID No. is not entered, black-and-white copying/black-and-
white printing/color printing is enabled.
Caution <Count for Conditional Operation>
Counter
Counter on
user mode screen
Card counter
ID No. counter
Control key
turned off
°
°
°
Card
not inserted
°
°
ID number
not entered
°
°
×
: increment : increment as needed ×: do not increment
— Guide to the Table —
a. Counter on the User Mode Screen
• The count is incremented regardless of the settings for conditional opera-
tion.
b. Card Counter
If the Control Card-IV is connected,
• If the setting for the absence of a card (2nd digit) is ‘3’ or ‘4’, the count is
not incremented regardless of the presence/absence of a card in black-and-
white copying mode.
• If the setting or the absence of a card (2nd digit) is ‘2’ or ‘4’, the counter
is not incremented regardless of the presence/absence of a card in black-
and-white printing/color printing mode.
If the Card Reader-B1 is connected,
• If the setting for the absence of a card (2nd digit) is ‘3’ or ‘4’, the counter
is not incremented in the absence of a card in black-and-white copying
mode.
• In black-and-white printing/color printing mode, the counter is not
incremented regardless of the setting for conditional operation.
However, the OA counter of the Copy Data Controller-A1 is incremented
regardless of the setting for unconditional operation.
c. ID No. Counter
• If the setting for the absence of an ID No. (3rd digital) is ‘3’ or ‘4’, the
counter is not incremented regardless of an ID No. input in black-and-
white copying mode.
• If the setting for the absence of an ID No. (3rd digit) is ‘2’ or ‘4’, the
counter is not incremented regardless of an ID No. input in black-and-
white printing/color printing mode.