Canon E1 - Page 163

3. Set the Long Lifter Wire on rear side of the Pulley. Set the Short Lifter Wire on front side of it.
CAUTION:
The Lifter Wire may be disconnected by wrong assembling. Put the Short Lifter Wire between the roller and the fixing plate
from the left side as shown in the figure.
Long Lifter Wire
Short Lifter Wire
Roller
Fixing Plate
RightLeft
Front
Rear
Long Lifter Wire
Short Lifter Wire
Roller
Fixing Plate
RightLeft
Front
Rear
4. Parts Replacement and Cleaning
155