Canon imageCLASS MF735Cdw - Setting up Using the Setup Guide

Setting Up Using the Setup Guide
1647-009
When the machine is turned on ( Turning ON the Machine(P. 116) ) for the rst time, the Setup Guide starts up to
assist you to congure the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the
setting screens are displayed in the following order.
Step 1 Setting the Display Language and the Country or Region
Set the language to be displayed on the operation panel screen or in reports, as well as the
country or region where the machine will be used.
1
Select a language.
2
Select <Yes>.
3
Select a country or region.
Step 2 Setting the Date and Time
Adjust the machine's date/time.
1
Select a time zone.
What is UTC?
● Coordinated Universal Time (UTC) is the primary time standard by which the
world regulates clocks and time. The correct UTC time zone setting is required
for Internet communications.
2
Enter the date and time, and select <Apply>.
Step 3 Performing the Color Adjustment
To achieve good copy quality, adjust the gradation.
1
Select <Yes>.
● If you select <No>, color adjustment is not performed, and the Setup Guide
proceeds to step 4.
2
Check that the size and type of paper displayed on the screen is loaded in the
machine, and select <OK>.
3
Conrm the procedure, and select <Start>.
➠ An adjustment image is printed.
4
Open the feeder after the screen displayed during printing is closed.
5
Place the adjustment image on the platen glass.
● Place the adjustment image with the print side facing down while checking that
the black stripe is placed on the back side of the machine.
Setting Up
9