Canon imageCLASS MF735Cdw - Configuring Ethernet Settings

Conguring Ethernet Settings
1647-015
Ethernet is a standard for communicating data in a local area network (LAN). You can
set the communication mode and the Ethernet type. In general, the machine can be
used without changing the defaults ( <Ethernet Driver Settings>(P. 463) ), but you
can change these settings to suit your network environment.
1
Select <Menu> in the Home screen. Home Screen(P. 122)
2
Select <Preferences> <Network>.
● If the login screen appears, enter the correct ID and PIN. Logging in to the Machine(P. 133)
3
Select <Ethernet Driver Settings>.
4
Select whether to congure Ethernet settings automatically or manually.
● If auto-detection is enabled, the machine detects and automatically sets the Ethernet communication mode
and the type that can be used.
Conguring Ethernet settings automatically
Select <On> in <Auto Detect>.
Conguring Ethernet settings manually
1
Select <Off> in <Auto Detect>.
2
<Communication Mode> select the communication mode.
<Half Duplex>
Alternately sends and receives communication data. Select when the machine is connected to a
networking device using half duplex.
Setting Up
51