<Off>
<On>
<Menu>
<Preferences>
<Network>
<Use Dedicated Port>
Select <Off> or <On>
Restart
the machine
<Dedicated Port Authentication Method>
Specify whether to limit the authentication method specically to the secure one when using the dedicated port. If
<Mode 2> is selected, the authentication method is limited specically to the secure one.
<Mode 1>
<Mode 2>
<Menu>
<Preferences>
<Network>
<Dedicated Port Auth. Method>
Select <Mode 1> or
<Mode 2> Restart the machine
● If <Mode 2> is selected, you cannot establish a connection from the device management software or driver
in some cases.
<Waiting Time for Connection at Startup>
Specify a wait time for connecting to a network. Select the setting depending on the network environment.
Setting a
Wait Time for Connecting to a Network(P. 54)
0 to 300 (sec.)
<Ethernet Driver Settings>
Select the Ethernet type (10BASE-T/100BASE-TX/1000BASE-T) and the communication mode of Ethernet (half-duplex/
full-duplex). You can also view the MAC address for wired LAN.
<Auto Detect>
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Conguring Ethernet Settings(P. 51)
<Off>
<Communication Mode>
<Half Duplex>
<Full Duplex>
<Ethernet Type>
Setting Menu List
463
To Next Page
Loading...
