<Display Settings>
1647-09J
All the settings related to viewing of the display are listed with descriptions. Default settings are marked with a dagger
( ).
<Default Screen After Startup/Restoration>(P. 444)
<Home Screen Button Display Settings>(P. 444)
<Language>(P. 445)
<Remote UI Language>(P. 445)
<Notify to Clean Original Scanning Area>(P. 446)
<Millimeter/Inch Entry Switch>(P. 446)
<Gram/Pound Switch>(P. 446)
<Display Timing for Cart. Prep.>(P. 446)
Asterisks (
*
)
● Settings marked with "
*1
" may not be displayed depending on the model you are using, options, or other
setting items.
● Settings marked with "
*2
" cannot be imported or exported.
● Settings marked with "
*3
" may be unavailable or vary or have different defaults depending on your country
or region.
<Default Screen After Startup/Restoration>
By default, the Home screen is displayed immediately after the machine is turned ON or when the Auto Reset function
is performed. Specify the setting to change the default screen and display the main screen of a different function.
<Home>
<Copy>
<Fax>
*1
<Scan>
<Secure Print>
<Status Monitor>
<Menu>
<Preferences>
<Display Settings>
<Default Screen After Startup/
Restoration> Select a function to display the desired screen
<Home Screen Button Display Settings>
*2
Congure the settings for the buttons displayed in the Home screen. You can select the settings that will be displayed
as shortcut buttons, rearrange the order in which the buttons appear, and insert or remove spaces.
Customizing
the Home Screen(P. 171)
<Select Button to Display>
Setting Menu List
444
To Next Page
Loading...
