<Printer>
1647-0A4
All the settings related to the printer are listed with descriptions. Default settings are marked with a dagger ( ).
<Printer Settings>(P. 493)
<PDL Selection (Plug and Play)>(P. 534)
Asterisks (
*
)
● Settings marked with "
*1
" may not be displayed depending on the model you are using, options, or other
setting items.
● Settings marked with "
*2
" may be unavailable or vary or have different defaults depending on your country
or region.
● Settings marked with "
*3
" cannot be imported or exported.
Priority of settings
● If a print setting is specied both from the printer driver and the operation panel of the machine, the
specication from the printer driver overrides that from the operation panel. The specication from the
operation panel becomes effective in some specic cases, such as when performing PS/PCL printing and
printing from UNIX or other operating system that does not support printer drivers.
<Printer Settings>
Congure settings about printing and printer operations.
<Prioritize Driver Settings When Printing>
Select whether printing is performed in accordance with the printer driver's settings for paper size and type
taking priority over the settings made for each paper source under <Paper Settings> in the Home screen. By
selecting <On>, you can print from the paper source specied in the printer drive, regardless of the paper
settings on the machine. An error message can be set to display if the loaded paper size is largely different from
that set in the printer driver.
<Multi-Purpose Tray>
<Prioritize Driver Settings>
<Off>
<On>
<Action When Size Mismatch>
<Force Output>
<Display Error>
<Drawer 1>
<Prioritize Driver Settings>
<Off>
Setting Menu List
493
To Next Page
Loading...
