● Name, fax numbers, e-mail addresses, organization names, and organization unit are available criteria for
searching destinations.
4
Enter the search target char
acter string, and select <Apply>.
● On how to enter text, see Entering Text(P. 131) .
● To specify multiple search criteria, repeat steps 3 and 4.
5
Select <Search Method>.
6
Select conditions to display the search result.
<Using All Conditions Below>
Searches and displays the users that meet all the search criteria specied in steps 3 and 4.
<Using Some Conditions Below>
If users that meet even one of the criteria specied in steps 3 and 4 are found, displays all those users.
7
Select <Start Search>.
➠
The users meeting your search criteria are displayed.
● If the authentication screen appears when you select <Start Search>, enter the user name of the machine
and the password register
ed in the LDAP server, and select <Apply>.
Registering LDAP Servers(P. 63)8
Select the check box for the user that you want to specify as destination, and select
<Apply>.
Adding a destination
● To send faxes to multiple destinations at a time (sequential broadcast), repeat the appropriate steps to
enter all destinations.
● You can also recall previously used destinations. Recalling Previously Used Settings for Sending
(Recall Settings)(P. 231)
Faxing
220
To Next Page
Loading...
