● If you want to cancel, select <Cancel> <Yes>. Canceling Sending Documents(P. 300)
When placing originals in the feeder in step 1
When scanning is complete, the saving process starts.
When placing originals on the platen glass in step 1
When scanning is complete, follow the procedures below (except if you selected JPEG as a le format).
1
If there are additional pages of originals to be scanned, place the next original on the platen glass, and
select <Scan Next>.
● Repeat this step until you nish scanning all of the pages.
● When there is only one page to be scanned, proceed to the next step.
2
Select <Finish>.
➠ The saving process starts.
● A new folder is created on the USB memory device, and the scanned document is stored in that folder. The
le name of a scanned document is automatically assigned based on the following format: the characters
SCAN followed by a four-digit number.le extension name.
● If you always want to scan with the same settings: Changing the Default Settings for Functions(P. 176)
● If you want to register a combination of settings to use when needed: Registering Frequently Used
Settings(P. 174)
Scanning
290
To Next Page
Loading...
