Canon imageCLASS MF735Cdw - Page 479

<Correct Print Color Mismatch>
Select the timing at which the Correct Print Color Mismatch function is to be performed automatically after the
machine is turned ON. You can also perform this adjustment manually ( Correcting "Print Color
Mismatch"(P. 599) ).
<After Printing First Job>
<When Turning Main Power ON>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Auto Correction
Settings> <Correct Print Color Mismatch> Select <After Printing First Job> or <When Turning
Main Power ON>
<Correct Print Color Mismatch>
Use this function if color shift has blurred the image.
Correcting "Print Color Mismatch"(P. 599)
<Black Text Processing for Color>
Adjust the threshold value to determine whether to print black text in color originals by using only black toner or by
using a mixture of black and color toners. You can set values for the feeder and the platen glass separately.
Adjusting Values for Text Color Reproducibility in Color Documents(P. 600)
<Feeder>
Seven Levels
<Platen Glass>
Seven Levels
<Adjust Print Position>
Adjust the print position for each paper source. The print position can be adjusted in the range from -0.20" to +0.20"
(-5.0 to +5.0 mm) in increments of 0.01" (0.1 mm).
Adjusting Print Position(P. 602)
<Multi-Purpose Tray>
<Adjust Vertically (Front Side)>
-0.20" to 0.00"
to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
<Adjust Horizontally (Front Side)>
-0.20" to 0.00"
to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
<Adjust Vertically (Back Side)>
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
<Adjust Horizontally (Back Side)>
-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
<Drawer 1>
<Adjust Vertically (Front Side)>
-0.20" to 0.00"
to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))
Setting Menu List
471