Canon imageCLASS MF735Cdw - Page 485

<Rdc. Condens. (1-Sd->2-Sd Prt)>
*
When performing 2-sided printing after 1-sided printing, the printed images may be faint due to moisture
condensation. In this case, setting to <On> may solve the problem.
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special Processing> <Rdc.
Condens. (1-Sd->2-Sd Prt)> <On> <Yes>
● If you set to <On>, the printing speed may be slower.
<Rdc Condens. (Consec 2-Sd Prt)>
If the printed images are faint due to moisture condensation when performing 2-sided printing, setting to other
than <Off> may solve the problem.
MF735Cdw / MF733Cdw / MF731Cdw
<Off>
<Mode 1>
<Mode 2>
MF634Cdw / MF632Cdw
<Off>
<On>
<Menu> <Adjustment/Maintenance> <Adjust Image Quality> <Special Processing> <Rdc
Condens. (Consec 2-Sd Prt)> Select the item <Yes>
● For MF735Cdw / MF733Cdw / MF731Cdw, the improvement effect is stronger with <Mode 2> than
<Mode 1>.
● If you set to other than <Off>, the print may be faded or the printing speed may be slower.
<Correct Uneven Gloss>
*
When gloss unevenness occurs in the leading edge of paper, setting to <On> may solve the problem.
<Off>
<On>
Setting Menu List
477