Canon imageCLASS MF735Cdw - Page 522

<Gray Compensation>
Congures a setting so that black or gray data of which color information is "R = G = B" is printed using only
the K (black) toner. If <Off> is selected, data is printed using the toner of four colors: CMYK. This option can
be specied for each image type in any one document.
<Text>
<Off>
<On>
<Graphics>
<Off>
<On>
<Image>
<Off>
<On>
<Menu> <Function Settings> <Printer> <Printer Settings> <PCL> <Gray
Compensation> Select the type of image Select <Off> or <On>
<BarDIMM>
*1
This setting enables you to print bar codes supported by the Barcode Printing Kit. If <Enable> is selected, the
machine will generate bar codes when it receives bar code commands from the host computer. If <Disable>
is selected, bar codes will not be generated, even if bar code commands are sent from the host computer.
<Enable>
<Disable>
<Menu> <Function Settings> <Printer> <Printer Settings> <PCL> <BarDIMM> Select
<Enable> or <Disable>
● To enable the BarDIMM menu, it is necessary to activate the Barcode Printing Kit. When you are not
printing bar codes, make sure to disable the BarDIMM menu. Otherwise, the processing speed of
regular print jobs may be reduced.
● The default setting is <Disable>. If you activate the Barcode Printing Kit, it changes to <Enable>.
<FreeScape>
Specify the AEC (Alternate Escape Code) to be used for bar code commands when the host computer does
not support the standard Escape Code.
Setting Menu List
514