● Overprinting using special colors is not permitted.
<Grayscale Conversion>
*1
Specify the way of printing color data in black and white.
<sRGB>
<NTSC>
<Uniform RGB>
<Menu>
<Function Settings>
<Printer>
<Printer Settings>
<PS>
<Grayscale Conversion>
Select the type of grayscale conversion
<sRGB>
Prints in black and white with emphasis on color differences so that a smooth gradation is achieved.
<NTSC>
Prints in black and white so that the resulting image looks like a black and white television picture (of the NTSC
system).
<Uniform RGB>
Prints in black and white so that R, G, and B are uniformly converted to the same gray level by using only
brightness as the reference.
● This section describes the settings to convert the color data into grayscale data.
● This setting is invalid for black-and-white data.
<Imaging Settings>
You can change the print settings that will apply when printing image les (JPEG/TIFF).
<Halftones>
You can change the printing method used to reproduce halftones (the intermediate range between the
lighter and darker areas of an image) for optimal image quality.
<Gradation>
<Error Diffusion>
Setting Menu List
522
To Next Page
Loading...
