● Change the WEP authentication method to "Shared Key" at the wireless router, and connect again. For
more information about how to change, see the instruction manuals for your networking devices or
contact your manufacturer.
Use Remote UI to set the information necessary for authentication.
The IEEE 802.1X settings are incorrect.
● Check whether [Login Name] is set correctly.
● Check whether the [Use TLS], [Use TTLS], or [Use PEAP] check box is selected.
● If using TLS, check whether a "key and certicate" is registered.
● If using TTLS or PEAP, check whether a user name and password are set correctly.
Conguring IEEE 802.1X Authentication Settings(P. 398)
Troubleshooting
657
To Next Page
Loading...
