1
This sets the B Format for and C Paper Size.
Note
•
The configuration method varies depending on the OS
and application software you are using.
If Page Setup is displayed in the application menu, the
settings are configured by opening the Page Attributes
dialog box from Page Setup.
If it is not displayed, the settings are configured in the
upper part of the printer driver displayed when you se-
lect Print from the application software menu.
2
Select the printer in the A Printer list.
3
Choose the original size in the FPaper Size list.
4
If you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and
then select Print from the application software menu.
5
Access the Page Setup pane.
6
Select and click a roll paper in the A Paper Source list.
Cutting Roll Paper After Printing (Mac OS X)
iPF760
User's Guide
Enhanced Printing Options Other useful settings
154
To Next Page
Loading...
