Canon iPF760 - Page 456

Setting Item Description, Instructions
System
Setup
Keep Paper Size
TrimEdge Reload Specify whether to trim the leading edge of the currently re-
tracted roll when the roll is advanced. Cut the edge if you are
concerned about any marks left on the roll when the roll is
left in the retracted position.
Specify On to have rolls cut when printing begins after Sleep
mode or when the power is restored. Selecting Automatic
will trim the edge when the roll has been in the retracted po-
sition for two days or more.
Rep.P.head Print Choose On to have the printer automatically execute the Ad-
vanced Adj. operations after you replace the Printhead.
(See "Automatic Adjustment to Straighten Lines and Colors
(Head Posi. Adj.).")
→P.502
Nozzle Check In Frequency, specify the timing for automatic checks of
nozzle clogging. Choose Standard to have the printer adjust
the timing for checks based on the frequency of nozzle use.
Choose 1 page to check once per page.
Select Warning > On to display warnings if the nozzles clog
during printing.
Use USB When Off is selected, the device can no longer be accessed
via USB.
Use Ethernet When Off is selected, the device can no longer be accessed
via Ethernet.
Use RemoteUI Choosing Off prohibits access from RemoteUI. Settings can
only be configured from the control panel.
Reset PaprSetngs Restores settings that you have changed with Media Config-
uration Tool to the default values.
Show Job Log Selecting Off prevents display of the log in Job Menu > Job
Log. Additionally, the log is not printed if you choose Job
Menu > Print Job Log. Note that because job logs are not
collected, the Status Monitor accounting functions will not
work correctly.
Prep.MovePrinter Select this option when transferring the printer to another lo-
cation. Follow the instructions displayed to complete the re-
quired procedure. (See "Preparing to Transfer the Printer.")
→P.542
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
Admin.
Menu
Change Password By setting a password, you can restrict menu display and
configuration as follows. You can input between 0 and
9999999.
• Viewing and configuration by administrators only
IPv4 Settings
DNS Settings
Change Password
Init.Admin.Pswd
Menu Settings iPF760
User's Guide
Control Panel Printer Menu
456