CAPINTEC, INC. CRC
®
-25R
1. INIT EE
2. SERIAL #
3. CHAMBER
Figure 15-10
f. Press 1 to select INIT EE to initialize the system. Figure 15-11 will appear for
several seconds. After the program initialization is complete, Figure 15-10 will
re-appear.
Please Wait
Figure 15-11
g. Press 2 to select SERIAL # to re-enter the Readout Unit’s Serial Number.
Figure 15-12 will appear.
S/N: 000000
Correct?
Figure 15-12
h. Press 6(NO) to answer no to the Main Unit Serial Number.
i. Input the serial number of the Main Unit and press ENTER.
j. Press 9(YES) to answer yes to the new serial number. Figure 15-10
will re-
appear.
k. Turn off the power switch on the back of the Readout Unit.
March 15 CLEANING AND MAINTENANCE 15 - 11
To Next Page
Loading...