Arrangement of Parts
• All disassembled parts should be carefully arranged
for reassembly.
• Be sure to separate and identify the parts to be
replaced from those that will be reused.
Cleaning of Parts
• Carefully and thoroughly clean all parts to be
reused.
WARNING!
Using compressed air can cause dirt and other particles to fly out causing injury to the eyes. Wear protective
eye wear whenever using compressed air.
Component Reassembly
• Standard values, such as torques and certain
adjustments, must be strictly observed in the reas-
sembly of all parts. If removed, replace these parts
with new ones:
− Oil seals
− Gaskets
− O-rings
− Lock washers
− Cotter pins
− Nylon nuts
PROPER SERVICE PRACTICES
BESM010010
BESM010011
BESM010012
01–6
Chery Automobile Co., Ltd.
To Next Page
Loading...
