Depending on location:
• Apply sealant and gaskets, or both, to specified
locations. When sealant is applied, install parts
before sealant hardens to prevent leaks.
• Apply oil to the moving components of parts.
• Apply specified oil or grease at the prescribed loca-
tions (such as oil seals) before reassembly.
Adjustments
• Use suitable gauges and testers when making
adjustments.
Rubber Parts and Rubber Tubing
• Prevent gasoline or oil from getting on rubber parts
or tubing.
PROPER SERVICE PRACTICES
BESM010013
BESM010014
BESM010015
01
01–7
Chery Automobile Co., Ltd.
To Next Page
Loading...
