Cisco ASR 9000 Series Reference Guide

This example shows sample output for the show l2vpn forwarding summary location command:
RP/0/RSP0/CPU0:router# show l2vpn forwarding summary location 0/0/CPU0
Major version num:1, minor version num:0
Shared memory timestamp:0x4005e57a0
Number of forwarding xconnect entries:4
Up:4 Down:0
AC-PW:0 AC-AC:0 AC-BP:0 AC-Unknown:0
PW-BP:0 PW-Unknown:0
PBB-BP:4 PBB-Unknown:0
Number of xconnects down due to:
AIB:0 L2VPN:0 L3FIB:0
Number of p2p xconnects: 0
Number of bridge-port xconnects: 4
Number of nexthops:0
Number of bridge-domains: 5
Number of static macs: 0
Number of locally learned macs: 0
Number of remotely learned macs: 0
Number of total macs: 0
This example shows sample output for the show l2vpn forwarding detail location command for IOS-XR
5.3.1 and earlier releases:
RP/0/RSP0/CPU0:router# show l2vpn forwarding detail location 0/1/CPU0
Local interface: TenGigE0/0/0/1/0.1, Xconnect id: 0x80005, Status: up
Segment 1
AC, TenGigE0/0/0/1/0.1, status: Bound
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Segment 2
Bridge id: 19, Split horizon group id: 0
Storm control: disabled
MAC learning: enabled
MAC port down flush: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: no
MAC Secure: disabled, Logging: disabled, Accept-Shutdown: enabled
DHCPv4 snooping: profile not known on this node, disabled
Dynamic ARP Inspection: disabled, Logging: disabled
IP Source Guard: disabled, Logging: disabled
IGMP snooping profile: profile not known on this node
MLD snooping profile: profile not known on this node
Router guard disabled
P2MP PW: disabled
Local interface: PBB Core, Xconnect id: 0x2000001, Status: up
Segment 1
AC, TenGigE0/0/0/1/0.1, status: Bound
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
Segment 2
Bridge id: 19, Split horizon group id: 0
Statistics:
packets: received 0, sent 0
bytes: received 0, sent 0
This example shows sample output for the show l2vpn forwarding detail location command for IOS-XR
5.3.2 release
RP/0/RSP0/CPU0:router# show l2vpn forwarding detail location 0/6/CPU0
Local interface: TenGigE0/0/0/1/0.1, Xconnect id: 0x80005, Status: up
Segment 1
AC, TenGigE0/0/0/1/0.1, status: Bound
Statistics:
packets: received 0 (multicast 0, broadcast 0, unknown unicast 0, unicast 0), sent 0
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
178
Point to Point Layer 2 Services Commands
show l2vpn forwarding

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model