Cisco Catalyst 3750-X

2-1000
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
vtp primary
Examples This example shows how to configure the switch as the primary VTP server for VLANs:
Switch# vtp primary vlan
Setting device to VTP TRANSPARENT mode.
You can verify your settings by entering the show vtp status privileged EXEC command.
Related Commands Command Description
show vtp status Displays the VTP statistics for the switch and general information about the
VTP management domain status.
vtp (global
configuration)
Configures the VTP filename, interface, domain name, mode, and version.