Cisco Catalyst 3750-X

C-29
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform port-asic
prog-parser [asic number |
port number [asic number]]
Display the programmable parser tables. The keywords have these
meanings:
• asic number—(Optional) Display information for the specified
ASIC. The range is 0 to 1.
• port number—(Optional) Display information for the specified port
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
receive {buffer-queue |
port-fifo |
supervisor-sram} [asic
number | port number [asic
number]]
Display receive information. The keywords have these meanings:
• buffer-queue—Display the buffer queue information.
• port-fifo—Display the port-FIFO information.
• supervisor-sram—Display the supervisor static RAM (SRAM)
information.
• asic number—(Optional) Display information for the specified
ASIC. The range is 0 to 1.
• port number—(Optional) Display information for the specified port
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
span [vlan-id | asic number] Display the Switched Port Analyzer (SPAN)-related information. The
keywords have these meanings:
• vlan-id—(Optional) Display information for the specified VLAN.
The range is 0 to 1023.
• asic number—(Optional) Display information for the specified
ASIC. The range is 0 to 1.
stack {control | dest-map |
learning | messages | mvid |
prog-parser | span | stats
[asic number | port number
[asic number]]
Display stack-related information. The keywords have these meanings:
• control—Display stack control-status register information.
• dest-map—Display destination-map information.
• learning—Display entries in the learning-cache.
• messages—Display the stack-message register information.
• mvid—Display entries in the mapped VLAN-ID table.
• prog-parser—Display the programmable parser tables.
• span—Display SPAN-related information.
• stats—Display raw statistics for the port ASIC.
• asic number—(Optional) Display information for the specified
ASIC. The range is 0 to 1.
• port number—(Optional) Display information for the specified port
and ASIC number. The range is 0 to 27, where 0 is the supervisor
and 1 to 25 are the ports.
These keywords are available only on Catalyst 3750-E switches.