Cisco Catalyst 3750-X Command Reference

C-45
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Appendix C Catalyst 3750-X and 3560-X Show Platform Commands
show platform tcam
Syntax Description
Note Though visible in the command-line help strings, the ipv6, equal-cost-route, multicast-expansion,
secondary, and usage keywords are not supported on switches running the LAN base feature set.
Note Though visible in the command-line help strings, the usage keyword is not supported.
Command Modes Privileged EXEC
handle number Display the hardware memory handle. The range is 0 to
4294967295.
log-results Display the hardware memory log results.
table {acl | all | equal-cost-route
| ipv6 {acl | qos | secondary}
local | mac-address |
multicast-expansion | qos |
secondary | station | vlan-list}
Display lookup and forwarding table information. The keywords
have these meanings:
• acl—Display the access-control list (ACL) table.
• all—Display all the hardware memory tables.
• equal-cost-route—Display the equal-cost-route table.
• ipv6—Display IPv6 information.
– acl—Display the IPv6 ACL-table information.
– qos—Display the IPv6 QoS-table information.
– secondary—Display the IPv6 secondary-table
information.
• local—Display the local table.
• mac-address—Display the MAC-address table.
• multicast-expansion—Display the IPv6 multicast-expansion
table.
• qos—Display the QoS table.
• secondary—Display the secondary table.
• station—Display the station table.
• vlan-list—Display the VLAN list table.
usage Display the CAM and forwarding table usage.
[[asic number [detail [invalid]] |
[index number [detail [invalid]] |
invalid | num number [detail
[invalid]] | invalid] | [invalid] |
[num number [detail [invalid]] |
invalid]]
Display information. The keywords have these meanings:
• asic number—Display information for the specified ASIC
device ID. The range is 0 to 15.
• detail [invalid]—(Optional) Display valid or invalid details.
• index number—(Optional) Display information for the
specified hardware memory table index. The range is 0 to
32768.
• num number—(Optional) Display information for the
specified hardware memory table number. The range is 0 to
32768.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing