Cisco Catalyst 3750-X

2-491
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
power-priority
Examples This is an example of setting the power priority for switch 1 in power stack a to 7, for the high-priority
ports to 11, and for the low-priority ports to 20.
Switch(config)# stack-power switch 1
Switch(config-switch-stackpower)# stack-id power_stack_a
Switch(config-switch-stackpower)# power-priority high 11
Switch(config-switch-stackpower)# power-priority low 20
Switch(config-switch-stackpower)# power-priority switch 7
Switch(config-switch-stackpower)# exit
Related Commands Command Description
stack-power switch number Enters switch stack-power configuration mode for the switch.
show stack-power Displays information about stack power configuration.