Cisco Catalyst 3750-X Command Reference

2-546
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
sdm prefer
Examples This example shows how to configure the access template on a switch:
Switch(config)# sdm prefer access
Switch(config)# exit
Switch# reload
This example shows how to configure the routing template on a switch running the IP base or IP services
feature set:
Switch(config)# sdm prefer routing
Switch(config)# exit
Switch# reload
This example shows how to configure the dual IPv4-and-IPv6 default template on a switch:
Switch(config)# sdm prefer dual-ipv4-and-ipv6 default
Switch(config)# exit
Switch# reload
This example shows how to change a switch template to the default template.
Switch(config)# no sdm prefer
Switch(config)# exit
Switch# reload
Related Commands
IPv6 multicast groups 1 K 1 K 1 K 1 K
Directly connected IPv6 addresses 2 K 0 1.5 K 2K
Indirect IPv6 unicast routes 1 K 0 1.25 K 1.25 K 3 K
IPv6policy-based routing ACEs 0 0 0.25 K 0.125 K
IPv6 QoS ACEs 0.5 K 0.5 K 0.5 K 0.125 K
IPv6 security ACEs 0.5 K 0.5 K 0.5 K 0.125 K
Table 2-24 Approximate Feature Resources Allowed by Dual IPv4-IPv6 Templates (continued)
Resource
Dual IPv4-and IPv6 Templates
Indirect IPv4 and
IPv6 Routing Default VLAN Routing
Command Description
show sdm prefer Displays the current SDM template in use or displays the templates that can
be used, with approximate resource allocation per feature.

Cisco Catalyst 3750-X Specifications

General

Switching Capacity	160 Gbps
Stacking Bandwidth	64 Gbps
Max Stacking Units	9
Layer Support	Layer 2 and Layer 3
Form Factor	Rack-mountable
DRAM	256 MB
Flash Memory	64 MB
Model	Cisco Catalyst 3750-X Series
Ports	24 or 48 10/100/1000 Ethernet ports
Uplink Interfaces	4 SFP or 2 SFP+
Features	StackWise Plus, EnergyWise
Image	IP Base or IP Services
Operating Temperature	0 to 40°C
Operating Humidity	10 to 85% noncondensing