Cisco Catalyst 3750-X

2-644
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
show hw-module switch
This is sample output showing the speed set for only port group 1 for all switches in a stack. The Active
column specifies the speed at which the port is operating.
Switch# show hw-module switch all port-group 1
Switch Port-Group Active Inactive
---------------------------------------------
1 1 Te1/1/1 Gi1/1/2
2 1 Te2/1/1 Gi2/1/2
3 1 Te3/1/1 Gi3/1/2
4 1 Te4/1/1 Gi4/1/2
5 1 Te5/1/1 Gi5/1/2
6 1 Gi6/1/2 Te6/1/1
7 1 Te7/1/1 Gi7/1/2
8 1 Te8/1/1 Gi8/1/2
This is sample output showing the speed set for both port groups on switch 2 in the stack:
Switch# show hw-module switch 2 port-group all
Switch Port-Group Active Inactive
---------------------------------------------
2 1 Te2/1/1 Gi2/1/2
2 2 Te2/1/2 Gi2/1/4
Related Commands Command Description
hw-module switch Sets the port speed for a network module slot.