Citizen CT-S280 - Cutter Commands; ESC I

- 138 -
2.2.11 Cutter Commands
ESC i
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Full cutting ofpaper
[Code] <1B>H<69>H
[Outline] [The specification which is commontothemodel]
•Executes full cutting ofpaper.
[Caution] [The specification which is commontothemodel]
•Thiscommandonlyworks it isentered atthe beginning of aline.
•Before cutting paper,feed thepaper more thanthe cutting position ofpaper from the print position. Without
this paper feeding,thecharacter justafter printingremains before thecutter.
MSW4-8=ON:This commandworks aspartialcut command.
[The specification which depend on the model]
CT-P290/292
•Thiscommanddoesnotfunction.
CT-S300/CT-S310/CT-S2000/CT-S4000/
CT-S801/CT-S851/CT-S601/CT-S651/PMU series
•With label- or BM-supported model, this command does not function at the setting of BM
paper/label paper setting.
[Sample Program] [PrintResults]
Cut state
LPRINT“AAAAA”;
LPRINTCHR$(&H1B);"J";
LPRINTCHR$(150);
LPRINTCHR$(&H1B);"i";
AAAAA
Cut position
AAAAA
Paper feed
direction