Citizen CT-S280 - GS C 0 M N

- 184 -
GS C 0 m n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Setting the numbering print mode
[Code] <1D>H<43>H<30>H<m><n>
[Range] 0≤m≤5
0≤n≤2
[Outline] [The specification which is commontothemodel]
•Thiscommandsets thenumbering(serial number counter)print mode.
•“m”denotesthe number of print columns.
m=0 Prints the columns indicated by numeral.In thiscase, “n”hasno meaning.
m=1to 5 Indicates themaximumnumber ofcolumnsto beprinted.
Printsthe counter in “m”columns.
“n”specifiesaprinting position within theprintingcolumns.
n=0 Prints the data right justified.The blank columns arespaced.
n=1 Prints the data right justified.The blank columns arefilled with"0".
n=2 Prints the data leftjustified. The right blankwill become invalid.
[Caution] [The specification which is commontothemodel]
•Ifeither “m”or “n”hasa value beyond their ranges, that setting will becomesinvalid.
[Default] m=0,n=0
[See Also] GS C1,GSC 2, GSC；,GS c
[Sample Program]
LPRINTCHR$(&H1D);"C0"; *CNT
LPRINTCHR$(0); CHR$(0); FOR I=1 TO5
GOUSAB *CNT LPRINTCHR$(&H1D);"c";
LPRINTCHR$(&H1D);"C0"; NEXTI
LPRINTCHR$(1); CHR$(0); LPRINT CHR$(&HA);
GOUSAB *CNT RETURN
LPRINTCHR$(&H1D);"C0";
LPRINTCHR$(3);CHR$(0); [Print Results]
GOUSAB *CNT
LPRINTCHR$(&H1D);"C0";
LPRINTCHR$(3); CHR$(1);
GOUSAB *CNT
LPRINTCHR$(&H1D);"C0";
LPRINTCHR$(3); CHR$(2);
GOUSAB *CNT
END
12345
67890
11 12 13 14 15
016017018019020
21 22 23 24 25
Counts from 1to5 atm =0 andn =0.
Counts from 6to10 atm =1 andn =0.
Counts from11 to15 at m= 3and n=0.
Counts from 16 to20 at m= 3and n=1.
Counts from 21 to25 at m= 3and n=2.