Citizen CT-S280 - FF (at Selection of; FF (Valid Only for Black Mark;Label Specification)

- 55 -
FF (At selection of PAGE MODE)
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Printing in PAGE MODE and returning to STANDARDMODE(atthe selectionofPAGE MODE)
[Code] <0C>H
[Outline] [The specification which is commontothemodel]
•Executesabatchprintoutofthedatamappedintheentireprintarea,andthenreturnstoSTANDARDMODE.
[Caution] [The specification which is commontothemodel]
•All mapped data iserasedafter printout.
•The print area set up byESCW isinitialized.
•Thiscommanddoes not execute apaper cut.
•After this command isexecuted, the beginning of thelineis taken asthe startpositionforthenext print.
•Thiscommandis onlyeffectivewhenthePAGEMODE isselected.
CT-S4000
•When selecting BM paper or label paper to specify the PAGE MODE, data extended to all
printing area is printed in batch. After returning to the STANDARD MODE, setting the start
position of next label is carried out.
[See Also] Appendix5.1.4“Example of UsingPAGEMODE”
ESC FF,ESCL, ESCS
FF (valid only for Black mark/Label specification)
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] At selectionofBlack mark/Label paper (valid onlyforBlack mark/Label specification)
[Outline] [The specification which is commontothemodel]
• This command prints the data in the printer buffer and searches for the head of the next Black mark/Label
(Blackmark position/Top oflabel)
[Caution] [The specification which is commontothemodel]
•Thiscommanddoes not execute apaper cut.
•After this command isexecuted, the beginning of thelineis taken asthe startpositionforthenext print.
•Valid only for label- or BM-supported model.
(Please confirm specifications for the details.)
[See Also] GSFF