Citizen CT-S280 - GS F N

- 142 -
GS f n
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Selecting thefontofHRIcharacters
[Code] <1D>H<66>H<n>
[Range] 0≤n≤2,48≤n≤50
[Outline] [The specification which is commontothemodel]
•Selecting thefontofHRIcharacters inprinting bar code.
•The type offont canbeselected with“n”as follows:
[The specification which depend on the model]
CT-S300/CT-S310/CT-S801/CT-S851/CT-S601/CT-S651/ CT-P29x series
n
Font
0,48
Font A(12×24)
1,49
Font B(9 ×17)
2,50
Font C(8 ×16)
CT-S280/CT-S281/CT-S2000/CT-S4000/BD2-2220/PMU series/ CT-S301II
n Font
0,48
Font A(12×24)
1,49
Font B(9 ×24)
2,50
Font C(8 ×16)
[Caution] [The specification which is commontothemodel]
•The HRI characters are printedatthe position specified withGSH.
[Default] n=0
[See Also] GS H
[Sample Program] [PrintResults]
LPRINTCHR$(&H1D);"h"; CHR$(50);
LPRINTCHR$(&H1D);"H"; CHR$(2);
LPRINTCHR$(&H1D);"f"; CHR$(0);
GOSUB BC
LPRINTCHR$(&H1D);"f"; CHR$(1);
GOSUB BC
END
BC:
LPRINTCHR$(&H1D);"k";
LPRINTCHR$(4);
LPRINT“12”; +CHR$(0);
LPRINTCHR$(&HA);
RETURN
* 1 2 *
* 1 2 *
FONT A
FONT B