- 396 -
4.1.10 BD2-2220
No. Setting OFF ON
MSW1-1 Power ON Info ● Valid Not send
MSW1-2 Buffer Size ● 4K bytes 45 bytes
MSW1-3 Busy Condition ● Full/Err Full
MSW1-4 Receive Error ● Print ? No Print
MSW1-5 CR mode ● Ignored LF
MSW1-6 Reserved ● Fixed -
MSW1-7 DSR Signal ● Invalid Valid
MSW1-8 Reserved ● Fixed -
MSW2-1 Reserved - ● Fixed
MSW2-2 Reserved - ● Fixed
MSW2-3 Spool Print ● Invalid Valid
MSW2-4 Full Col Print ● LineFeed WaitData
MSW2-5 Resume aft H.D(*) ● Next Top
MSW2-6 Reserved - ● Fixed
MSW2-7 Reserved ● Fixed -
MSW2-8 Reserved ● Fixed -
MSW3-1 Resum Cttr Err ● Valid Invalid
MSW3-2 Reserved ● Fixed -
MSW3-3 Reset ● Valid Invalid
MSW3-4 Reserved ● Fixed -
MSW3-5 Reserved ● Fixed -
MSW3-6 Reserved ● Fixed -
MSW3-7 Reserved ● Fixed -
MSW3-8 Resum H.U Err(*) Close ● Command
●: Factory setting
*This function is enabled for platen close/open operation when LT-2x21 is used.
To Next Page
Loading...
