- 167 -
FS p n m
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Printing thedownload NV bitimages
[Code] <1C>H<70>H<n><m>
[Range] 1≤n≤255, 0≤m≤3,48≤m≤51
[Outline] [The specification which is commontothemodel]
•Thiscommandprints thedownload NV bit images (n)using aspecified mode (m).
m Mode Name
Dot Densityin
Vertical Direction
Dot Densityin
Horizontal Direction
0,48
NORMALMODE
203dpi 203dpi
1,49
DOUBLE WIDTH MODE
203dpi 101dpi
2,50
DOUBLE HEIGHT MODE
101dpi 203dpi
3,51
QUADRUPLE SIZEMODE
101dpi 101dpi
•“n”denotes the number ofthe downloadbit image.
•“m”denotesthe bitimage mode.
[Caution] [The specification which is commontothemodel]
•When the specified NV bit image “n”is undefined,this command isinvalid.
•WhentheSTANDARDMODEis selected,thiscommand isvalid onlywhen thereisnodata in the printbuffer.
•Thiscommandis invalid when PAGEMODE isselected.
• Any printing modes except the upside-down printing mode (i.e. emphasis, double strike, underlining,
character size, invertedcharacter printing,90°-right-turned) arenotaffected.
•WhentheprintingareasetbythefunctionsGSLandGSWisnotenoughforoneverticallineofthedownload
NV bit image, the line alone is dealt with asfollows.
Oneverticallineofthebitimageis1 dotinNORMAL MODE (m =0, 48) and DOUBLE HEIGHT MODE(m =
2,50),anditis2 dots in double WIDTHMODE (m =1, 49) and QUADRUPLE SIZE MODE (m =3, 51).
(1)Theprintingareaisextendedtothe rightsidewithinthelimits ofthe printing areaso thatone verticalline
ofthedownload NVbit image canbeprinted.
(2) When a sufficient printing area cannot be maintained even after executing (1), the printing area is
extended totheleft side. (Theleft margin isreduced.)
• When the size of a bit image exceeds the limits of the printing area, the data within the limits of the printing
areawill beprinted butthe partsexceeding thelimit will not be printed.
•Regardlessoftheamount ofline feed set withESC 2and ESC3, NORMAL MODE andDOUBLE WIDTH
MODE executea paperfeed of (height “n”of NV bit image)dots while DOUBLE HEIGHT MODE and
QUADRUPLE SIZEMODEexecutea paperfeed of(height “n” ofNV bitimage x2)dots.
•Atthe completion of thebitimage printing,thehead ofthe line willbe used for the next printing position and
normaldata processing willtake place.
[See Also] ESC*, FSq, GS /,GS v0