Citizen CT-S280 - ESC P M N1 N2

- 336 -
ESC p m n1 n2
CT-S280 CT-S300 CT-S2000 CT-S4000 BD2-2220 PMUseries
Supportmodel
CT-S281
CT-S310 CT-S801/851 CT-S601/651 CT-P29x series CT-S310II
[Function] Generating the specifiedpulses
[Code] <1B>H<70>H<m><n1><n2>
[Range] m=0, 1, 48, 49
0<n1≤n2≤255
[Outline] [The specification which is commontothemodel]
•The signalsspecified by “n1”and “n2”are output tothe connectorpinspecified by “m”.
•“m”hasthe followings.
m Connector Pin
0,48 Drawer kick-out pinNo. 2
1,49 Drawer kick-out pinNo. 5
•The ONtime isn1 x2 ms,and OFF time n2 x2ms.
[Caution] [The specification which is commontothemodel]
•When “m” isbeyond adefinitionrange, no signal isoutput, discarding “n1” and“n2”.
•The drawer drive dutymust be within thefollowing range:
(The OFFtime shouldbe 4times ormore longer thanthe ON time.)
[Sample Program]
LPRINTCHR$(&H1B) +"p"
LPRINTCHR$(0); -----SelectspinNo. 2.
LPRINTCHR$(5); -----Sets ON time to10 ms
LPRINTCHR$(50); ----- Sets OFFtime to100 ms
ONtime
ONtime＋OFF time
≤ 0.2